Product Description
Welcome to Serverworlds.com's Refurbished Poweredge R610 Configured to Order Page.
On this page you can configure your own custom Poweredge R610 Server. Our R610 Servers
are carefully configured to meet your specific requirements. We also update the bios and firmware
prior to shipping our servers. Configure your own Poweredge R610 Server today!
Poweredge R610 Servers are highly scalable 1U Dell Servers. The R610 features
12 memory slots that support up to 192GB of DDR3 ECC Registered memory. Need
lots of disk space? Don't worry, you can configure your R610 with up to 6 x SAS/SATA 2.5"
hot plug hard drives as well as an optional SD-Reader for Hypervisor. The R610 also supports
up to 2 x 6 Core Xeon X5690 Processor that are ideal for virtual enviornments.
For extra redundancy make sure to choose an R610 server that has redundant 502w
or 717w Power Supplies. You can also choose upgraded raid controllers like the Perc 6i
or H700 that support more robust raid configurations like Raid 5, 6, 10, 50 and 60. Need help
picking out a configuration that will fit your needs? Feel free to call or email Jake@serverworlds.com
for help.
Poweredge R610 Specs:
- Processor(s): Supports 2 x QC Xeon E55XX or 2 x 6C Xeon X56XX Processors
- Memory: Supports up to 192GB of DDR3 8500R/10600R Memory
- Hard Drive(s): Supports up to 6 x 2.5" SAS or SATA Hard Drives
- Controller: Supports SAS 6IR, Perc 6i Raid, H200, H700 Controllers
- Network: 4 x 10/100/1000 Embedded Broadcom 5709C Network Ports (Optional Toe)
- Remote Access: Drac 6 Express Embedded (Optional Drac 6 Enterprise)
- I/O Slots: 2 x PCIe X8 Slots, 1 x PCIe X4 Slot (1 is dedicated to storage)
- SD-Reader: Supports Optional SD-Reader for Hypervisor (shown in picture)
- Video: Integrated 8MB Matrox G200 Video
- Power Supplies: Supports up to 2 x 502W/717W Power Supplies
- Optical Drive: Supports CD-Rom, DVD-Rom, DVD-RW Optical Drives
- Rails: Supports 4 Post Ready Rail Kit or 2/4 Post Ready Rail Kits
- Bezel: Supports a Decorative Bezel w/Key
- Operating System: Not Included
The Poweredge R610 is a fully tested Dell server.
The Poweredge R610 has been fully refurbished by Serverworlds.com.
The Poweredge R610 will be professionally packed and shipped out via
FedEx to the Lower 48 States.
Free Ground Shipping to the lower 48 States
Q & A:
If I order a Poweredge R610 with out Hard Drives will it include hard drive trays?
No, R610 Hard Drives trays can be ordered seperately if you need them under sku G176J.
Does Serverworlds test the Poweredge R610 Servers prior to them being shipped?
Yes, we run diagnostics and perform the lastest bios/firmware updates to each server before it is shipped.
How quickly will my Poweredge R610 Server(s) ship once I place an order?
We generally ship servers within 1 business day of the server being ordered. However, if you have an larger order
it may delay the shipping to 2 business days. If you need expedited service please contact Jake@serverworlds.com.
Do you offer local pick up on your Poweredge R610 Servers?
Yes, we have a Will-Call Service that is set up in the back of our warehouse. Once your server has been configured,
tested, updated by our in house technicians we will contact you with a release number to pick up your product.
Does the Poweredge R610 Support a dual display video cards?
Yes, It supports low power consumption PCIe x1 Graphics Cards. We recommend the NVIDIA
NVS290 or NVS295. Remember, it must be a PCIe x1 Interface and support drivers for your Operating
System.
Can I mix Registered and Non-Registered memory in my R610 Server?
No, if you purchased an R610 server with non-registered memory and want to upgrade, you'll
most likely have to remove the existing modules and upgrade to registered modules.
Will the R610 Server support Solid State Hard Drives?
Yes, the R610 Server does support 2.5" Solid State Hard Drives. We recommending using
enterprise level hard drives.
Other Details
30 Day WarrantyProduct Videos
Custom Field
Product Reviews
8 Reviews Hide Reviews Show Reviews
-
File server
Our district is small but we keep a lot of data. This server is fast enought to meet our needs.
-
Dell R610
So Far so Good!!!!!
-
Match exactly what has been ordered, A1 condition, Like a new one!
First, the ordering process was very easy. Shipping cost to Canada was very reasonable and incredibly fast even with the custom. The server looks like a new one without any dust outside and inside. The cover has just little normal sign of used but it doesn't matter, it is a refurbished server at fraction of the price of a new one! Except this, you can't tell if the server is used or a new one! And the most important, the configuration was exactly what I ordered and all the bios and firmware was already updated! I will surely order other servers from ServerWolds in a near future! Thank you!
-
Thanks
The server arrived 5 days after I ordered via the free ground service. It worked out of the box. One of the hard drives failed 2 weeks after I put the system in to production. I emailed serverworlds and Jake was very responsive about the issue. He shipped a replacement hard drive quickly and included a return shipping label for the defective drive. The server has now been running for 4 months w/o any other issues.
-
Bought this server in June / 2012, still up and running
Bought this server at a third of what it cost brand new to save my client some money on setting up a high end virtual network on a tight budget. Not only did this server met the specs, its hasnt been rebooted except for twice in the past two years
-
Great Replacement
I had one of my R610's in my data center die. I was able to configure a replacement R610 identical to the system I was replacing. It shipped quickly. It worked! Thanks
-
Good Stuff
Great pricing for a 12 core 1U Server. Shipped quickly. I had trouble configuring the raid controller and was able to call in for support and received help quickly. Thanks!
-
Great Value
I configured an R610 as 2 x QC 2.8Ghz, 48GB, 4 x 300GB, Perc 6I, RPS, DVD-Rom, Rails. The system arrived in good condition for refurbished. Serverworlds updated all the firmware and made sure the system was packed very well. The server is now in production and working perfectly.
